YAMAHA Pick and Place Machine 当前位置: Home >>News>>News
How to Maintain The Yamaha SMT Placement Machine
How to Maintain The Yamaha SMT Placement Machine
 
ETA full SMT solution provider, we offers brand new original pick and place machine, Yamaha SMD chip mounter, and high speed flexible Yamaha SMT placement machine. best solutions and service.
 Pick and Place Machine
Due to the impact of the environment, other parties also believe that the dust has not been cleaned up in time, and the large amount of dust or grease inside the machine will have a very serious impact on the machine itself. The relationship between these advantages and disadvantages is affected. The life of the machine. If it is not correctly positioned, maintained and handled, it will easily affect the normal operation of the Yamaha SMT placement machine. If it is serious, it will cause excessive tension on some parts of the machine or serious accidents. In order to avoid this situation from happening again, it is necessary to combine scientific maintenance methods for maintenance.
 
1. Clean and lubricate the moving parts of the Yamaha SMT pick and place machine. When the machine runs for a long time, due to improper environmental control, there will be a lot of dust sticking to the moving parts (such as: screw, guide rail, sliding block, transmission belt, motor coupling, etc.). The purpose of maintenance is to prevent the placement machine from failing to maintain and clean the moving parts of the machine in a timely and professional manner. If the machine runs for a long time under overload, it will inevitably affect the service life of the machine;
 
2. Clean, disassemble and wash the dust and scale on the surface of the Yamaha SMD chip mounter and the circuit board of the pick n place machine. The purpose of maintenance is to avoid poor heat dissipation inside the machine due to dust and dirt, causing electrical parts to overheat and burn out;
 
3. Performing major maintenance on the Yamaha chip shooter can effectively reduce the throwing rate, reduce the number of alarms, improve machine production efficiency, and improve production quality
 
4. Disassemble and clean the internal air circuit, solenoid valve, vacuum generator, cylinder, etc. of the Yamaha SMT mounting machine; the purpose of maintenance is to avoid grease in the air circuit. If the air circuit cannot be cleaned and maintained in time, it will block the air circuit and cause the air circuit. Unsmooth, resulting in high dumping; in severe cases, the oil stains accumulated in the gas path will corrode the solenoid valve, vacuum generator, cylinder and other internal sealing rings and components, resulting in damage to the components, and seriously affecting the normal use of the machine ;
 
5. How to install the machine has passed the warranty period, long-term operation, the machine must be fully and professionally overhauled, some parts of the machine already have hidden dangers (such as: the wear of the machine line, the wear of the cable rack, the motor, the screw Loose screws, bad actions of some mechanical parts, wrong parameter settings, etc.), so the purpose of maintenance is to avoid hidden dangers that cannot be solved in time, which is bound to threaten the normal production of the machine in the future. Therefore, the machine must be maintained in a timely manner. Check and discover hidden dangers inside the machine and solve them, thereby reducing the frequency of machine failures and improving production efficiency;
 
6. After a long time operation of the Yamaha PCB pick and place machine, the related parts of the machine are worn, deformed, aging, and there are minor deviations between the parts of the machine. The original parameters of the machine have been adapted to the current situation of the machine, and the placement accuracy of the machine has been affected. Therefore, the purpose of maintenance is to calibrate the machine regularly, so that the machine can be produced in a high-precision state, and the quality of the product can be improved.
 Yamaha SMT Placement Video

文章From:http://www.ledpickandplace.com/te_news_media/2020-09-12/23161.chtml